with Audio Mid RecorderView
Online Recording Tutorial
- You might be able to convert
your sound card to a DirectSound-compatible full-duplex sound card by installing
the latest version of the sound driver for your sound card. Contact the manufacturer
of your sound card to inquire about how to obtain and install the latest version
of the sound driver for your sound card.
Audio from Videotape and Cassette Tape
can extract the audio from a videotape and then convert it to MP3 , WAV , WMA
, OGG files.
- Connect the left
and right audio-out terminals on the VCR to the line-in or microphone terminal
on the sound card.
Audio Mid Recorder.
- Click Wizard button to Start the project.
Wizard - Step1 : Click the Device list, select
"Line-in" or "Mic", in the Volume dropdown list.
"Default Volume and Balance" button
to Adjust the recording volume for the highest possible performance, or you can
change the volume and balance yourself
"Next" ButtonIn Wizard - Step2 : If you want the program create
the file automatically, please select the "Auto Create File Format"
you want, and select the output directory.
- If the volume is too high,
the output file will have hissing sound, noise in the background.
- If you have create a file
or want to name the file name yourself for output file, you can Press "Save
as" Button in Main Form, and select the file you've created.
Press "Next" ButtonIn Wizard - Step3 : You can decide
whether the Record operation will Start, Pause, Stop, Restart automatically.
- If you select Start automatic,
you can press "Record" button on the Main Form first then playback your
input file with WinAmp or the streaming audio from Internet, after you press "Record"
button , the program will start attacking first (not record really) , and it will
Start recording after the volume of your playing file above your setting here,
the program will not record the silence to your output file.
"Next" ButtonIn Wizard - Step4 : You can set the Time limitation
and File Size limitation of your output file.
Press "Finish" ButtonIn
Audio Mid Recorder window, click the Record button.
- The Free trail version can't
change these options in File Length Limitation Form, you can record only 60 seconds
in the free trail version. If you want to record for unlimited time, please register
it. The registration fee is only $29.95.
Play on the VCR.
- If you select Start automatic
in Wizard - Step3 , The program will not start recording immediately .the program
will start attacking first (not record really) , and it will Start recording after
the volume of your playing file above your setting, the program will not record
the silence to your output file.
pause the recording by clicking the Stop button at any time. Start again by clicking
the Record or Pause button.To
stop recording, click the Stop button, if you select stop automatically. You need
only wait for the finishing of your playing file.
- If the volume settings are
too low, you see only very small variations in the wave pattern in the display
area of the Audio Mid Recorder window.
the sound is clipped because the volume is too high, move the line-in or microphone
volume setting down until most of the volume range is displayed without clipping.
If the sound is too low, increase the volume setting.
on your sound card and the volume of the audio source, you might not get enough
volume using the line-in input. In this case, try the microphone input, as the
volume sensitivity through the microphone input is generally greater than with
the line-in input.