with Audio Mid Recorder View
Online Recording Tutorial
- You might be able to convert
your sound card to a DirectSound-compatible full-duplex sound card by installing
the latest version of the sound driver for your sound card. Contact the manufacturer
of your sound card to inquire about how to obtain and install the latest version
of the sound driver for your sound card.
Audio from a Microphone Most sound
cards can receive sound input from a microphone through the sound card microphone
port. This is useful for recording voice or sounds directly to your computer.
- Check your hardware. If your
microphone has never worked, or it stopped working, first check the physical connection
of the microphone. Verify that it is firmly plugged into the microphone port instead
of the headphone or speaker port.
- If you are not sure which
port is correct, you can check the sound card to see if it is marked. Sometimes
the sound card has a picture of a microphone. Otherwise, you can use a process
of elimination, check the documentation that came with your hardware, or contact
the hardware manufacturer.
Audio Mid Recorder.
- Click Wizard button to Start the project.
Wizard - Step1 : Click the Device list, select
"Microphone" which might appear as "Microphone", "Mic",
in the Volume dropdown list.
- Press "Default Volume and Balance"
button to Adjust the recording volume for the highest possible performance, or
you can change the volume and balance yourself
"Next" ButtonIn Wizard - Step2 : If you want the program create
the file automatically, please select the "Auto Create File Format"
you want, and select the output directory.
- If the volume is too high,
the output file will have hissing sound, noise in the background.
- If you have create a file
or want to name the file name yourself for output file, you can Press "Save
as" Button in Main Form, and select the file you've created.
Press "Next" ButtonIn Wizard - Step3 : You can decide
whether the Record operation will Start, Pause, Stop, Restart automatically.
- If you select Start automatic,
you can press "Record" button on the Main Form first then playback your
input file with WinAmp or the streaming audio from Internet, after you press "Record"
button , the program will start attacking first (not record really) , and it will
Start recording after the volume of your playing file above your setting here,
the program will not record the silence to your output file.
"Next" ButtonIn Wizard - Step4 : You can set the Time limitation
and File Size limitation of your output file.
Press "Finish" ButtonIn
Audio Mid Recorder window, click the Record button.
- The Free trail version can't
change these options in File Length Limitation Form, you can record only 60 seconds
in the free trail version. If you want to record for unlimited time, please register
it. The registration fee is only $29.95.
- If you select Start automatic
in Wizard - Step3 , The program will not start recording immediately .the program
will start attacking first (not record really) , and it will Start recording after
the volume of your playing file above your setting, the program will not record
the silence to your output file.
You can pause the recording
by clicking the Stop button at any time. Start again by clicking the Record or
Pause button.To stop recording,
click the Stop button, if you select stop automatically. You need only wait for
the finishing of your playing file.
- If the microphone is plugged
into the correct jack, the wave patterns on the display should move up and down.
If it does not move, sound is not going to your microphone. If the wave moves,
click the Stop button, and then click the Play button to listen to your recording.